EK Water Blocks 3831109855218 Handbuch PDF herunterladen

Installation and mounting manual for EK-FC480 GTX backplate

This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no liability

whatsoever, expressed or implied, for the use of these products, nor their installation. The following instructions are subject to change without notice. Please visit our web site at www.ekwaterblocks.com

for updates.

Before installation of this product please read important notice, disclosure and warranty conditions printed on the back of the box.

STEP 1: GENERAL INFORMATION. Sam

icture of NVidia GeForce 480 GTX

hic card.

STEP 2: PREPARING YOUR GRAPHIC CARD 480 GTX

EK-FC480 GTX backplate is very easy to install. First install EK-FC480 GTX water block according to its manual. If you have it already installed,

please check below which mounting screws for water block are to be left in their position. Please remove all other screws (not encircled).

STEP 3: ATTACHING E

-FC480 GT

BACKPLATE

Take enclosed mounting screws and install them as shown on picture below. EKWB recommends users to start with M3x12 screws (please use M3

washers on all mounting screws). Afterwards turn card around and fasten remaining M3x8 screws (HINT: do not tighten screws until they are all

positioned in their mounting holes). Please note that nuts must be used on M3x8 screws in order to provide proper connection of PCB and

backplate. Backplate has milled in standoffs, so there is no fear of overtightening the screws. Nevertheless, do not exaggerate with screwing force

as there is no need for it.

(Please note that EKWB holds no responsibility of any kind if assembly is not made by instructions. This applies also for all products that are not out

of EKWB production line. Users must by all means also consider instructions that are being made for proper use of FC blocks.)

REQUIRED TOOLS AND MOUNTING SCREWS:

3 x screws M3x12 7991DIN 4 x M3x8 7991DIN 4 x M3 nut 2mm allen key 

Useenclosedallenkeyon

screwstoattachbackplate.

Alldisclosures,noticesandwarrantyconditionsarebeingwrittenonthebackofthebox.    Releasedon19

ofMay,2010.

M3x8screws

M3x12screws

M3nut

M3washer

for updates 1

Inhaltsverzeichnis

Seite 1 - for updates

Installation and mounting manual for EK-FC480 GTX backplate This product is intended for installation only by expert users. Please consult with a qua

Kommentare zu diesen Handbüchern

Keine Kommentare

EK Water Blocks 3831109855218 Handbuch

Stöbern Sie online oder laden Sie Handbuch nach Computer Flüssigkeitskühlung EK Water Blocks 3831109855218 herunter. EK Water Blocks 3831109855218 Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computer Flüssigkeitskühlung EK Water Blocks 3831109855218